NT7218L HF Drivers 3 inches
Notes
- 3 INCH ALUMINIUM VOICE COIL
- 108 dB/SPL SENSITIVITY
- 220 WATT PROGRAM POWER HANDING
- FEM OPTIMIZED MOTOR ,PHASEPLUG AND DIAPHRAGM
- 500-18000 Hz FREQUENCY RANGE
- TITANIUM DIAPHRAGM AND SUSPENSION
- VOICE COIL COPPER DEMODULATION RING
- 108 dB/SPL SENSITIVITY
- 220 WATT PROGRAM POWER HANDING
- FEM OPTIMIZED MOTOR ,PHASEPLUG AND DIAPHRAGM
- 500-18000 Hz FREQUENCY RANGE
- TITANIUM DIAPHRAGM AND SUSPENSION
- VOICE COIL COPPER DEMODULATION RING
GENERAL SPECIFICATIONS
Throat diameter | 36(1.4) mm (in.) |
---|---|
Nominal impedance | 8 Ω |
Minimum impedance | 6 Ω |
Program power (1) | 220 W |
AES Power rating(2) | 110 W |
Sensitivity (3) | 108 dB |
Frequency range | 500 ~ 18000 Hz |
Voice coil diameter | 72(3) mm (in.) |
Magnet material | Neodymium |
Magnet dimensions (ODxIDxh) | 97 mm |
Coil material | ALR |
Former material | Kapton |
Diaphragm material | Titanium |
Voice coil Inductance | 0.09 |
Flux density | 1.8 T |
Recommended crossover (4) | 1200 Hz |
SHIPPING INFORMATION
Net weight | 2 Kg |
---|---|
Multipack size (12) (W x D x H) | 400 x 270 x 165 mm |
Multipack weight | 25.8(12PCS) Kg |
OTHERS
(1)Program power is defined as 3 dB greater than AES Power
(2)Horn loaded test 2h with continuous, brand-limited(500-18000Hz,12dB/oct)pink noise as per AES 2-1984 Rev.2003.
(3)Measured on axis at 2.83V,1m, driver loaded with 80°× 60° horn, SPL average in the frequency range 500- 18000 Hz.
(4)High pass filter with slop 12 dB/oct. or higher.
(2)Horn loaded test 2h with continuous, brand-limited(500-18000Hz,12dB/oct)pink noise as per AES 2-1984 Rev.2003.
(3)Measured on axis at 2.83V,1m, driver loaded with 80°× 60° horn, SPL average in the frequency range 500- 18000 Hz.
(4)High pass filter with slop 12 dB/oct. or higher.